Choosing a split system air conditioner in Victoria takes some thought. There are many brands and a long list of sizes. Summers can be hot and winters can be cold, so the best unit depends on where you live and how your home is built.
Size is the first thing to sort out. The Victorian Government says a system that is too small may not heat or cool your home well. A system that is too big costs more to buy and may cost more to run.
What Is a Split System Air Conditioner?
A split system has two parts. The indoor unit hangs on a wall. The outdoor unit sits outside and has the motor inside. Pipes and wires join the two. A reverse cycle split system can heat your room in winter and cool it in summer. A single split joins one indoor unit to one outdoor unit, so it suits one room or one open plan area.
Many Victorian homes use gas heaters, and a reverse cycle split system is a common swap. If you want to cover more rooms, multi-split systems link several indoor units to one outdoor unit. Ducted reverse cycle systems blow air through vents to the whole home.
Start With the Right Size
Size is measured in kilowatts (kW). This is the power of the unit, so a higher number means more heating and cooling. Bigger is not always better, as Solar Victoria points out. A small unit in a big room has to work hard. A big unit in a small room switches on and off in short bursts, and the room ends up with uneven temperatures.
Start with the floor area of the room. Ceiling height matters too, because a tall room has more air to heat or cool. The table below comes from the Victorian Energy Upgrades guide. It is a guide only, and the guide says a qualified technician should confirm the size.
| Room Size | Example Room | Heating Power Needed |
|---|---|---|
| Up to 20 m² | Bedroom, study | 2.5 to 3 kW |
| 21 to 40 m² | Bedroom with ensuite, small lounge | 3 to 5 kW |
| 41 to 60 m² | Lounge, large kitchen | 5 to 8 kW |
| Over 60 m² | Open plan areas, large lounges | 8 kW or more |
What Changes the Size You Need
Room size is only part of the picture. These things also change how much heating and cooling a room needs.
- Draughts: Gaps around doors and windows let heated or cooled air escape.
- Insulation: Insulation in the roof, walls and floor helps the room keep its temperature.
- Windows: Windows with one layer of glass lose heat. Big north or west facing windows let in more heat in summer.
- Sun and shade: A room with strong afternoon sun needs more cooling than a shady one.
- Wall type: Brick and weatherboard homes hold heat differently.
How Victorian Climate Affects Your Choice
Victoria has very different weather from one town to the next. A room in Mildura is warmer in summer and needs more cooling, while a room in Ballarat is colder in winter and needs more heating. Coastal Warrnambool and inland Ballarat also have different temperature ranges. Inland areas have less cloud cover, so they cool down more overnight and heat up more during the day.
The Victorian Government notes that Victorians typically use more energy for heating. A high heating star rating is a good goal for that reason. Check the heating power on the product sheet, since it can differ from the cooling power. An installer can suggest models for your area.
Star Ratings and Inverter Units
Energy labels help you compare units. Here is what to look for.
- Heating and cooling get separate star ratings, so check both.
- More stars means the unit uses less power.
- Pick the size first, then compare stars between models of that size.
- Inverter units slow down once the room is comfortable. Fixed speed units keep switching fully on and off.
Single Split, Multi-Split or Ducted?
Some homes need more than one room covered. The right system depends on how many spaces you want to heat and cool.
| System | How It Works | Suits |
|---|---|---|
| Single split | One outdoor unit joined to one indoor unit | One room or open plan area |
| Multi-split | One outdoor unit joined to several indoor units | Several rooms or the whole home |
| Ducted | One central outdoor unit sends air through ducts and vents | The whole home |
Ducted systems can cost more to install and run. You can also set zones, so only some areas get heated or cooled.
Features Worth Looking At
Once you have a size, features can help you narrow the shortlist. Pick the ones you will use.
- Wi-Fi control: Lets you turn the unit on from your phone before you get home.
- Timers and sleep mode: Handy for bedrooms on hot or cold nights.
- Noise: Check how loud the indoor and outdoor units are, especially for bedrooms and shared fences.
- Washable filters: Easy to keep clean.
- Warranty: Units that qualify for the VEU rebate need at least a five-year warranty.
Energy Go’s range includes Mitsubishi Electric, Panasonic, Hisense and Midea units. Compare the size and star ratings between brands for your room.
Where to Put the Indoor and Outdoor Units
Mount the indoor unit high on a wall with clear space in front. Keep it away from curtains and tall furniture. Try not to point the air straight at a couch or bed.
The outdoor unit needs fresh air around it to work well. Leave a gap and avoid tight corners. Think about the noise for your household and your neighbours. A licensed installer will check the pipe length and access before they start.
Split System Rebates in Victoria
The Victorian Energy Upgrades (VEU) program is a government scheme that gives discounts on some energy saving products. A split system rebate can apply when you replace an eligible older heater with an approved reverse cycle split system. The advertised maximum is up to $8,000, but that does not apply to every install. The amount depends on your current heater, the new system and the current VEU rules.
Check your eligibility before you buy or install anything. A new install does not automatically qualify. The unit also has to be an approved model that meets the program’s energy rules. The same rules sit behind the wider air conditioner rebate available across Victoria.
Your Home Sets the Size, So Start There
The right split system matches the room it heats and cools. Start by measuring the floor area and checking the ceiling height. Then look at your insulation and windows.
Once you have a size, compare heating star ratings and pick the features you will use. Check rebate eligibility before you buy. If you are unsure about the size, an installer can confirm it on site.
Not sure what size your room needs? Energy Go can look at your home, check your existing heating and explain which VEU rebate may apply to your upgrade. Send a quote request through the contact form and tell us about your current heating.
